A second electric power pick and carry crane has a lifting capacity of 10tm, with rear steering angle of 70 degrees. The crane has a 24kW motor for driving, 17kW for the boom and 5kW for hoisting.
Also on show is a 60tm diesel pick and carry crane. The high-tech crane has a rear axle with hydropneumatic suspension, a CAN-Bus network monitoring engine, gearbox, and loads. A variable delivery hydraulic pump has an electro-proportional distributor automatically adjusts to allow all motions to work at once, at reduced speed. One optional feature is a set of self-levelling forks for handling 30t loads, such as standard containers, free on wheels. The crane runs on a 240kW (352hp) Mercedes engine.
The 80t 804AC recovery crane has a six-section hydraulically extending boom that can reach heights of 48m above ground. With a total weight of 32t, the four-axle crane, 2.5m wide and 3.4m high, can travel without permits in Italy. When run with a permit, it can carry counterweight and equipment without needing a support vehicle. Attachments can be fixed to a tilting head for lifting in areas with low headroom.
