The 65SP model has an hydraulic extension with a maximum range of 28.50 meters and a varying standard weight from 6,510 to 7,560 kilograms (with empty fuel tank).
On the 85SP model, the hydraulic extension reaches a maximum of 32 meters, while its weight varies from 6,965 to 8,885 kg.
Both have a double connecting rod.
The new electronically controlled hydraulic extensions allow the operator to have total control of movement, with the possibility to also carry out manoeuvres at negative angles (up to 20 degrees), as compared to crane booms.
The PM Group has developed a PM Power Tronic system, which takes advantage of CAN-BUS technology (high speed data transmission that minimises connections between devices), in order to manage all crane manoeuvres with maximum simplicity and safety.
Through the PM Power Tronic system, the operator can also control the pressure inside the jacks, detect the angles of all the joints, and the oil temperature.
On the 65SP and 85SP models, a series of new generation, multifunctional remote controls are available, equipped with LCD monitors also used to monitor crane functions and relevant parameters at a distance. Furthermore, to meet the needs of the clients, other systems are also present, such as the CDS (Controlled Downstroke System). This system is comprised of low pressure valves, which are not affected by the weight induced by the load. This solution controls the load lowering movement, eliminating oscillations.
